Dit product is niet meer op voorraad
Waarschuwing: Laatste items in voorraad!
Sands long edges, end sections, radii, mitres, and, by turning the workpiece over - accurate flat surfaces at right angles.
Used on soft and hard woods, non-ferrous metals, steel, plastics (perspex and PC cards), cork and rubber. A simple chart indicates the recommended speeds on different materials.
Main body of ribbed die-cast aluminium (no steel tube or sheet metal construction). Turned flat grinding disc, provided with silicone film: This ensures that affixed sanding discs can be removed effortlessly after use. Two additional square silicone films for storage and reuse of used sanding discs are included. With dust collection adapter for connection to a vacuum cleaner for dust-free working. Complete with mitre gauge and 2 each sanding discs in grain 80 and 240.
220 - 240V with drive via optibelt toothed belt (reduction ratio 7.3:1). Electronic speed control approx. 250 - 750m/min. Disc diameter 250mm. Maximum sanding height 135mm, table 275 x 105mm (tilts 15° in, 45° out). Overall size without table 330 x 280 x 230mm.
NO 28 060
Coolant container and coolant collection tray are not included in the delivery.
Coolant system for wet sanding of glass, stone, tiles and steel.
Table size: 275 x 105mm with slot for mitre gauge and tilts up to 45°.
250mm-sanding disc machined with diamond tools. Double ball bearing.
Self-adhesive corundum sanding discs for TSG 250/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastic, cork, rubber and minerals.
Ø 250mm. Includes silicone film for storing used sanding discs.
NO 28 970
NO 28 972
NO 28 974
Self-adhesive silicone carbide sanding discs for TSG 250/E
For sanding non-ferrous metals, steel, glass, PC cards, plastics and ceramics. Can also be used in combination with the optional coolant system. Ø 250mm. Includes silicone film for storing used sanding discs.
NO 28 976
Self-adhesive silicone film for easy sanding disc replacement
For retrofitting older disc sanders TG 250/E (production before 2007 with serial no. up to 14190). Is attached to the sanding disc. Ensures that affixed sanding discs can be removed effortlessly after use. With 4 square silicone films for storage and reuse of used sanding discs.
NO 28 968 set
Made of plastic. With stop cock and regulator. 100cm tubing as well as 2 nipples for the MBS 240/E table and mounting bracket (incl. screws). Holds 1 litre.
NO 28 188
Coolant collection tray
Size 420 x 310 x 15mm. Includes gasket for sealing the fixing holes of the machine. With 50cm discharge tube and nipple for the band saw table. The tray is not drilled and may be used on other machines too.
NO 28 189
Geen klantenbeoordelingen op het moment.